We offer a selection of professionally rebuilt BARE, STOCK and PERFORMANCE upgraded genuine Chrysler 2.2/2.5 cylinder heads with a complete selection of performance upgrades for use on both normally aspirated and turbo charged engine applications for the Chrysler, Plymouth and Dodge automobiles built from 1983 to 1993 and utilizing the popular 2.2 and 2.5 liter engines.
These guaranteed genuine Chrysler manufactured cylinder heads have been professional machine shop refurbished and completely rebuilt including deep chemical cleaning, pressure tested for leaks and inspected for cracks, block to head surface resurfacing, new valve seats, new valve guides with integrated locks, new positive clad valve stem seals and on stock and performance heads a complete 3 angle valve job, assembled height and spring pressures checked and within factory performance specs, stock slider turbo camshaft (287) or 88 TBI roller(782), slider (287) or roller (782) cam followers. The non-bare heads are delivered completely loaded ready to be installed with all the typical installation accessories, gaskets and needed hardware.
Each “BARE” Cylinder head is delivered refurbished as described above and bare of all accessories. Bare heads are suitable for those do-it-myself turbo Dodge enthusiast that want complete control over their head build and want to start with a guaranteed refurbished head core.
Each “STOCK” cylinder head is delivered as described above and with all stock hardware and installation accessories. This is a ready to bolt on solution intended for the stock minded enthusiast wanting to perform a stock build with a guaranteed head shipped with everything needed for the installation.
Each “PERFORMANCE” upgraded Chrysler 782 2.2/2.5 cylinder head is delivered fully loaded with the following:
- Professional machine shop rebuilt cylinder head
- New valve seats
- +1mm Stainless Steel Performance Intake & Exhaust Valves
- HD Crane Valve Springs
- Mopar Performance Hardened Intake/Exhaust Valve Locks/Keepers
- OEM Valve Spring Retainers
- OEM Roller Cam Followers Roller/782)
- New valve guides w/locks
- New 88 TBI (782) or Slider (287) Cam
- Front and Rear Cam Seals
- Mopar Performance PT Lifters With Shims
- Turbo Dodge Parts Positive Clad Valve Stem Seals
- Turbo Dodge Parts Ultimate intake studs and copper clad flange nuts
- Turbo Dodge Parts Ultimate exhaust studs with copper clad flange nuts
- FelPro 10mm or 11mm head bolts
- FelPro Valve Cover Gasket (1 piece or multi-piece design)
- FelPro PermaTorqe head gasket
- No cylinder head core required
- Full 1 Year Unlimited Mileage Warranty
- Free Ground Shipping to any lower US 48
Available Performance Upgrades Include: