|
Turbo Dodge Electrical Connector List and Equivalent Part Numbers (Mouser) FAQ
The majority of the connecotrs listed below are available on Mouser. The ones that have been identified find are from Delphi (and FCI, which Delphi bought), and TE connectivity. Delphi and TE have got most of the things we need covered.
Note, this list does not include a source for the Ford-style "bullet terminal" connectors that most of our early 90's cars have. FORTUNATELY most of those are available in Delphi Weatherpack equivalent (i.e. TPS or MAP)
Also note, DO NOT buy gold or silver terminals. You might think they are better, but components don't come with gold or silver terminals, so you'd be interfacing different materials, which increases the risk of galvanic corrosion. You're best to just get the tin ones. If you want to buy gold male and female and make up your own end, i.e. oxygen sensor, go ahead.
TURBO DODGE CONNECTOR LIST
MAP Sensor:
- 12041332 (3-way Weather Pack, Orange, 3-bar index)
- 12015796 (3-way Weather Pack, Black, 3-bar index)
- 12015384 (3-way Weather Pack, Gray, 2-bar index) Part from vehicle, verified from Delphi drawing
TPS:
- 12015793 (3-way Weather Pack, Black, also for 3-wire O2 AND 1-bar MAP)
- 12015800 (3-way Weather Pack, Blue)
O2 (3-wire, the one on the O2 sensor, not the interfacing connector):
- 12010717 (Female, 3-way Weather Pack, Black)
Terminals for the above (Delphi Weather Pack):
- 12089040 (Male, 0.5 - 0.8 mm², for 18-20 AWG, TPS, MAP)
- 12146501 (Male, same size, silver plated)
- 12089307 (Male, 0.22 - 0.35 mm², for 22-24 AWG)
- 12124582 (Male, 1.0 - 2.0 mm², for 14-16 AWG)
- 12089188 (Female, 0.5 - 0.8 mm², 3-wire O2)
Cable Seals for the above (Delphi Weather Pack):
- 15324985 (violet, 1.60 - 2.15 mm cable diameter, Liquid Silicone)
- 15324982 (green, 2.03 - 2.85 mm, Liquid Silicone)
- 12129930 (Orange, 2.03 - 2.85 mm, FluoroSilicone)
- 15324983 (Red-Brown, 1.29 - 1.70, Liquid Silicone)
- 15324980 (Gray, 2.81 - 3.49 mm, SIL)
- 15324981 (Blue, 3.45 - 4.30 mm, Liquid Silicone)
AIS:
- 12162188 (4-way Metri-Pack 150.2 pull-to-seat, Black, mushroom index, Green, 2.00-2.66 mm O.D.)
- 12162189 (4-way Metri-Pack 150.2 pull-to-seat, Black, mushroom index, Tan, 1.65-2.15 mm O.D.)
- 12162190 (4-way Metri-Pack 150.2 pull-to-seat, Black, mushroom index, Orange, 1.47-1.85 mm O.D.)
- 12124075 (Pull-to-seat terminal, 2.03 - 2.40 mm cable)
AIS Alternate:
- 15354716 (4-way GT150 for AIS)
- 15305028 (4-way GT150 TPA)
Thermistors (Coolant Temp, Charge Temp Sensors):
- 12162193 (2-way Metri-Pack 150.2 pull-to-seat, Black, Mushroom index, green seal, 2.00-2.66 mm cable)
- 12162195 (2-way Metri-Pack 150.2 pull-to-seat, Black, Mushroom index, orange seal, 1.47-1.85 mm cable)
- 12162199 (2-way Metri-Pack pull-to-seat, Grey, Key index)
Thermistor Alternate:
- 15336004 (2-way GT150 for thermistor) - (a best pick connector)
- 15305024 (2-way GT150 TPA)
- 12191818 (GT150 Female Tin Terminal, 0.35-0.50 mm², 1.20-1.85 mm OD)
- 15326265 (GT150 Female Tin Terminal, 0.75-1.00 mm², 1.70-2.25 mm OD)
- 15471370 (GT150 Female Gold Terminals, 0.75-0.80 mm², 1.70-2.02 mm OD)
- 15366021 (GT150 Cable Seal, Round, White, 1.20-1.90 mm cable OD)
- 15366060 (GT150 Cable Seal, Round, Blue, 1.86-2.40 mm cable OD)
- 15305351 (GT150 Cable Seal, Oval, Yellow, 1.7-2.1 mm cable OD)
- 15366022 (GT150 Cable Seal, Oval, Green, 1.4-1.9 mm cable OD)
- 15317832 (GT150 CPA)
Logic Module Terminals (and other interior connectors):
- 08-50-0023 (Molex, 18-22 AWG)
- 08-52-0113 (Molex, 18-20 AWG, larger insulation crimp, extra contact "ears", possible upgrade) - needs a slight pinch to fit the 25-pin housings
Others:
Bosch LSU 4.2 Wideband O2
- 936142-1 (TE, Micro Timer, 6-way connector)
- 144431-1 (TE, Junior Power Timer, 17 - 22 gauge tin terminal)
- 12157739 (Delphi, 2.8 Timer, tin terminal)
- 15324976 (Delphi, Metri-Pack 150, White Cable Seal)
Bosch LSU 4.9 Wideband O2
- 1599620-2 (TE, Housing, Micro-Timer, Available from OnlineComponents.com) verified to work with Bosch sensor p/n 17025.
- 284716-4 (TE, Housing, Micro-Timer, Mouser) verified, but is more difficult to disconnect than the 1599620 (may be good or bad, depending on what you want).
- 964274-2 (TE, Female Terminal, Micro-Timer, Available from OnlineComponents.com) HAVE
- 1241732-2 (TE, Female Terminal, Micro-Timer II, Mouser) HAVE, appears to be identical to 964274, but is pre-gapped a tiny bit (reduces connection force).
- 962876-2 (TE, Female Terminal, Micro-Timer, Mouser) HAVE, I can't tell any difference to 964274.
- 968015-2 (TE, Female Terminal, Micro-Timer, Mouser) HAVE, slightly different tang design (though, for what benefit?).
- 964972-1 (TE, Cable Seal, Micro-Timer, Yellow, 1.9 - 2.4 mm Insul. O.D, Available from OnlineComponents.com) HAVE
- 963530-1 (TE, Cable Seal, Micro-Timer, Gray, 1.4 - 1.9 mm Insul. O.D)
- 964971-1 (TE, Cable Seal, Micro-Timer, Red, 1.2 - 1.6 mm Insul. O.D)
These are some better alternative parts:
- 54200206 (2-way Black, Apex 2.8 Series, Sealed) - Oil Pressure Sending Unit or Switch, Ignition Coils - part in hand verified by drawing
- 54200308 (3-way Black, Apex 2.8 Series, Sealed) - Crank Position Sensor, Oil Pressure Transducer, Speed/Distance Sensor, Neon Ignition Coil, etc. - in hand verified by drawing
- 54200409 (4-way Black, Apex 2.8 Series, Sealed) - Cruize Control Servo - part in hand verified by drawing
- 54001802 (Female Tin Terminal, 18-20 AWG) - Possibly replaced by 10810375
- 54001801 (Male Tin Terminal, 18-20 AWG)
(Don't use gold terminals to interface with sensors, only use gold terminals for in-line connections where gold is in both male and female)
- 54001803 (Female Gold Terminal, 18-20 AWG)
- 54001819 (Male Gold Terminal, 18-20 AWG)
- 54200005 (Cavity Plug, Need for Newer Oil Pressure Switch)
More alternative parts with better connectors:
- 184246-1 (TE 2+2 pin Male SSC) - Oxygen Sensor (later, including Neon SRT-4) verified with '05 O2 sensor from my truck
- 173706-1 (TE Male, Bag, Tin, 16-20 AWG) HAVE - verified, but I would prefer a slightly longer blade option
- 171631-1 (TE Male, Reel, Tin, 20-24 AWG) In Stock
- 184000-1 (TE 2 pin Female SSC) - Outside Air Temp. Sensor (late model) - part in hand verified by drawing
- 184032-1 (TE 3 pin Female SSC) - 3.7L V6 Ignition Coil
- 184046-1 (TE 4 pin Female SSC) - AIS Motor (Late Model) - part in hand verified by drawing
- 184095-2 (TE Female, Tin, 17-22 AWG)
- 184030-3 (TE Female, Tin, 14-20 AWG)
- 184140-1 (TE Cable Seal, 1.6 - 2.1 mm Insul. O.D.)
- 176886-2 (TE Cable Seal, 1.8 - 2.6 mm Insul. O.D.) used this to verify the O2 sensor conn/term
- 282189-1 (TE Fuel Injector) HAVE - it's a cable sealed version with built-in TPA and provisions for the boot
- 880810-1 (2-way boot)
- It's hard to tell which terminal is best. I have all of these 3, but they all work just fine.
- 927770-1 (TE Female, Junior Power Timer, 17-20 AWG)
- 929939-1 (TE Female, Junior Power Timer, 17-20 AWG, same as above but with a longer body)
- 964286-1 (TE Female, Junior Power Timer, 17-20 AWG, almost the same as 927770, but slightly more robust?)
- 828905-1 (TE Cable Seal, White, 2.2 - 3.0 mm cable O.D.)
- 828904-2 (TE Cable Seal, Blue, 1.2 - 2.1 mm cable O.D.)
- Not sure if these are any better or worse than the last 2 seals, but they work too:
- 963293-1 (TE Cable Seal, Red, 2.0 - 2.7 mm cable O.D.)
- 963294-1 (TE Cable Seal, Blue, 1.2 - 2.1 mm cable O.D.)
--------------- CREDITS AND ACKNOLEDGEMENTS ---------------
Portions of this FAQ were sourced from Google searches as well as public turbo Dodge forums such as turbo-mopar.com. Contributions to this FAQ include those made by “Turbo SOB” a contribution member to the turbo-dodge.com forum
PLEASE CONSIDER SUPPORTING YOUR TURBO DODGE COMMUNITY FORUMS BY JOINING AND BECOMING A PAID MEMBER, YOUR PAID MEMBERSHIP HELPS TO SUPPORT THE FORUMS AND KEEP THE COMMUNITY CONNECTED AND PROVIDE A PLACE TO EXCHANGE TURBO DODGE ENTHUSIAST INFORMATION. JOIN TURBO-MOPAR.COM HERE
|
|