Product Description
Complete turbo L-body (1987 Shelby Charger) engine bay harness. Complete from blue/red logic module connectors all the way to the 10/12 way power module connectors and firewall bulkhead connector, also including the portions for headlights, blinkers, running lights, horn, ignition coil and vacuum solenoid block and connectors for the fuel injection harness and manifold sensors and the connector for the front charge harness and HEP & oil pressure/light sensors. All sensor connectors are present, fusable links all good, not hacked on, just a real good used original harness. Several of the relays are also included: Aux fan relay, starter solenoid relay, headlight relay. Need to be re-taped to look nice. The fuel injector harness and the front charge harness is not included. This is the complete turbo engine harness with the firewall grommet and mounting bracket and interior cable shield.
You can use this to convert from non-turbo to turbo any L-body car or trucklet. A direct fit for any 2 door, Shelby nose'd L-body, a 4 headlight car will need additional head lamp bulb sockets spliced in. An Omni or Horizon will also work but I believe the turn signal lights are in a different position, might have to transfer a bulb socket or two over.
Includes:
- Complete L-body engine bay harness from logic module to power module and including coil and vacuum solenoids
- Headlight relay
- Starter Relay
- Aux fan relay
- All connectors present and in good condition
- Wires are flexible and no insulation cracking or missing
- Good used turbo L-body engine harness, needs to be re-wrapped (cosmetics)
