|
 Finally here is a steel hard line, factory fit solution for the leaking or ruptured OEM Garrett TI or TII style oil supply line. The rubber center section of the factory line (part #4323108) has a real nasty history of becoming soft and rupturing or starting to leak and making all sorts of a mess, maybe even start a hot oil engine fire. It’s not a question of if it will leak and rupture, it’s a matter of when!
 This is a direct replacement oil supply line only for the Garrett TI and TII turbo Dodge application. This exclusive design includes our unique integrated and reuseable 80 MICRON filtration system and reclaimed factory steel lines and fittings. You can simply (well maybe simple is not the best word to describe this operation...but anyway) remove your factory oil line at the standard fittings, and replace with this ready made, filtered oil line. No adapters or any other changes are required. Our turbo oil line and filter fits very neatly in the same location as the factory turbo oil line and retains the stock appearance (except for the visible oil filter) and you can also install your factory air cleaner housing in it’s standard position with all the standard hardware. It’s a great fit in the spirit of the original factory piece, only better!
Each Fully Assembled
Turbo Oil Line Set Includes
Our quality assurance and post assembly inspection and testing insures the best fitting and factory appearing filtered oil supply line solution right out of the box.
REUSABLE MICRON OIL FILTRATION SYSTEM INCLUDED!
 Since the turbocharger relies on oil to cool, lubricate and maintain proper operation, it is critical that no contaminants are allowed to reach it’s precision bearings, thrust surfaces or the high speed turbine shaft. It can take only a few seconds for a little grit or debris to simply ruin your turbos bearings. The nano filtration system will filter out all but the smallest of debris that could otherwise harm and shorten the life of
Our air filtration system is a reusable MICRON screen type oil filtration system housed in a CNC aluminum housing that can be cleaned occasionally, like during an oil change. This is a very convenient, easy to service design that will save you time and maybe a lot of money by saving your turbo from premature failure due to oil borne debris.
This hose replaces the Chrysler, Dodge, Mopar
factory turbo oil line #4323108 aka (4323 108)
|
