Product Description
Good, clean, used 1989 2.2 common block (casting date 11/88), cross drilled with matching original forged Shelby crankshaft. Short block seals and gaskets included. Non-balance shaft engine. Complete with matching main caps and main cap bolts, front and rear crankshaft seal retainers and hardware, intermediate shaft seal retainer and hardware, oil pump, oil pump pickup tube, oil pan and hardware, turbo oil return tube, and front crankshaft/timing belt cog.
Standard bore on the block, cylinder walls have been deglazed with a bead hone and cleaned up nice with just a few strokes. See the detailed pictures. Deck is flat and has been cleaned. Standard size main and rod journals on crankshaft, oil hole edges have been chamfered, no spun bearings. See the digital caliper measurements shown in the pictures. Ready for the machine shop or use as-is with standard pistons and rings and bearings.
- 2.2 Non-Balance Shaft Block, standard size bore
- Casting date: 11/2/88
- Casting number: 431???? 12
- Matching main caps and main cap bolts
- Front crankshaft seal retainer and hardware
- Rear crankshaft seal retainer and hardware
- Intermediate shaft seal retainer and hardware
- Oil pump
- Oil pump pickup tube
- Oil pan and hardware
- Turbo oil return tube
- Front crankshaft/timing belt cog
SEALS AND GASKETS INCLUDED
- Front crankshaft seal
- Rear crankshaft seal
- Intermediate shaft bushings (2)
- Intermediate shaft seal
- Brass freeze plugs set
Great hard to find candidate block and forged crank with accessories and oil pan.
This item can be shipped, it will need to go FedEx Ground and may be shipped in two boxes, one with crank and one with block and accessories. Shipping calculator will know what to do at checkout.
LOCAL PICKUP IS ALSO AVAILABLE AT NO CHARGE. DELIVERY WITHIN 4 HOURS OF ATLANTA IS $.50/mile(both ways).