Product Description
TURBO DODGE COPPER EXHAUST STUD FLANGE NUTS
Turbo Dodge Cars w/8 Valve Engines
This is the popular Dodge and Chrysler 2.2 and 2.5 copper coated reduced hex (10mm) exhaust manifold nut upgrade. These are the highest quality GRADE 10 exhaust manifold stud nuts that are direct replacements for the factory grade 8 steel nuts. These are actually manufactured for the high performance turbo Porsche automobile but are a perfect standard fit for our turbo Dodge automobiles.
Unlike the standard Porsche grade 8 nuts for the non-turbo car, these are GRADE 10 steel nuts with the legendary Porsche style copper cladding for added serviceability, durability, and strength. These are not the less expensive grade 8 steel nuts.
These 8mm x 1.25 GRADE 10 steel nuts with the small hex (10mm) head that install directly on the factory exhaust manifold studs without any modifications necessary and since they are both self locking and copper clad, they will not loosen nor bond to the steel studs. So you get not only added grade 10 strength, you also get extended reliability and serviceability due to the self locking features and copper clad technology. They are also the standard 10mm hex wrench size so they are installed or removed using the same tooling as the factory nuts.
By replacing the factory grade 8 steel nuts with these GRADE 10 copper coated exhaust manifold flange nuts you get the following advantages:
- Increased fastener strength, grade 10 Vs. grade 8
- The fastener will not bond/rust to the stud making future removal easier
- You will gain 50 HP and 75 ft/lbs of torque (just kidding!)
So, when you purchase a turbododgeparts.com copper coated, GRADE 10, exhaust manifold nut set you will receive all of the following:
- (8) 8mmx1.25x10mm hex copper coated GRADE 10 self locking, exhaust flange nuts
- 1 Year, Unlimited Mileage Replacement Warranty
 |  |  |
