TURBO DODGE HEX ALLEN EXHAUST STUDS WITH COPPER FLANGE NUTS
Turbo Dodge Cars w/8 Valve Engines
This is our Dodge and Chrysler 2.2 and 2.5 copper coated exhaust manifold nut and polished hex allen head stud upgrade. These are the highest quality GRADE 10 exhaust manifold stud nuts and studs that are direct replacements for the factory grade 8 steel nuts and studs. The nuts are actually manufactured for the high performance turbo Porsche automobile and the studs are cold finished and polished studs that are harder and have a higher tensile strength than standard studs and are a perfect standard fit for our turbo Dodge automobiles.
Unlike the standard grade 8 studs and nuts for the non-turbo car, these are Porsche GRADE 10 steel nuts with the legendary Porsche style copper cladding for added serviceability, durability, and strength. These are not the less expensive grade 8 steel nuts. And our studs are grade 10 rolled steel studs with a hex alen head. These studs are far above the quality and strength of the factory cut thread studs.
These 8mm x 1.25 GRADE 10 steel nuts and studs install directly on the factory exhaust or intake manifold without any modifications necessary and since they are both self locking and copper clad, these nuts will not loosen nor bond to the steel studs. So you get not only added grade 10 strength, you also get extended reliability and serviceability due to the self locking features and copper clad technology. They are also the standard 10mm hex wrench size so they are installed or removed using the same tooling as the factory nuts.
By replacing the factory grade 8 steel nuts and studs with these GRADE 10 copper coated manifold flange nuts you get the following advantages:
- Increased fastener strength, grade 10 Vs. grade 8
- The fastener will not bond/rust to the stud making future removal easier or risk snapping off the stud or rounding the rusted nut.
- You will gain 50 HP and 75 ft/lbs of torque (just kidding!)
So, when you purchase a turbododgeparts.com copper coated, GRADE 10, manifold nut and stud set you will receive all of the following:
- (8) 8mmx1.25x10mm hex copper coated GRADE 10 self locking, flange nuts
- (8) 8mmx1.25x45mm cold finished and polished hex allen head studs
- 1 Year, Unlimited Mileage Replacement Warranty