Quick view Details Turbo Dodge Parts | sku: #CARBBREATHER Early Carb PCV/Breather Assembly w/Hoses MSRP: Now: $39.00 Add to Cart Compare Quick view Details Turbo Dodge Parts | sku: #T1PCVHOSE Early T1 Style (Log) PCV Hose #4105733 Compare Quick view Details Turbo Dodge Parts | sku: #EASYADJUST Easy Adjust Alternator Bracket MSRP: Now: $49.00 Add to Cart Compare Quick view Details sku: #EXHAUSTSTUDSANDNUTS EXHAUST MANIFOLD HEX STUDS w/COPPER NUTS MSRP: Now: $24.00 Add to Cart Compare Quick view Details Turbo Dodge Parts | sku: #NANOOILLINE Garrett Nano Filtered Turbo Oil Supply Line Compare Quick view Details Turbo Dodge Parts | sku: #GLHSFANASSEMBLY GLHS REPLACEMENT AUXILIARY FAN ASSEMBLY MSRP: Now: $279.00 Add to Cart Compare Quick view Details Turbo Dodge Parts | sku: #GLHSFANMOTOR GLHS REPLACEMENT FAN MOTOR MSRP: Now: $129.00 Add to Cart Compare Quick view Details sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MSRP: Now: $59.00 Choose Options Compare Quick view Details Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) MSRP: Now: $24.00 Add to Cart Compare Quick view Details sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Details Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Details Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE Compare Quick view Turbo Dodge Parts | sku: #CARBBREATHER Early Carb PCV/Breather Assembly w/Hoses Early 2.2 Carb engine PCV breather assembly with oil baffle snorkel and hoses. Nice, good used 2.2 carb engine PCV breather box, with original internal splash guard/baffle snorkel that goes inside the valve cover, this piece is almost always... MSRP: Now: $39.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #T1PCVHOSE Early T1 Style (Log) PCV Hose #4105733 *** ONLY 1 AVAILABLE *** New Genuine Mopar Crankcase Vent Valve Hose for Dodge and Chrysler "T1" (log manifold) turbo charged engines. Mopar #4105733. Attaches to the rear of the valve cover on the PCV vent hose fitting and connects the PCV valve to the... View Details Compare Quick view Turbo Dodge Parts | sku: #EASYADJUST Easy Adjust Alternator Bracket Easy adjust alternator bracket, refinished, mount bolt and adjuster hardware included. Replace your huge under powered original CryCo alternator that was designed for a points ignition with the later 90amp alternator units by NipponDenso or Bosh and use... MSRP: Now: $49.00 Add to Cart Compare Quick view sku: #EXHAUSTSTUDSANDNUTS EXHAUST MANIFOLD HEX STUDS w/COPPER NUTS TURBO DODGE HEX ALLEN EXHAUST STUDS WITH COPPER FLANGE NUTS Turbo Dodge Cars w/8 Valve Engines This is our Dodge and Chrysler 2.2 and 2.5 copper coated exhaust manifold nut and polished hex allen head stud upgrade. These are the highest quality GRADE... MSRP: Now: $24.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #NANOOILLINE Garrett Nano Filtered Turbo Oil Supply Line GARRETT TI/TII TURBO OIL SUPPLY LINE W/ REUSABLE 80 MICRON FILTRATION SYSTEM8 Valve Turbo Dodge Cars: Replaces Factory #4323108 Protect your turbo Dodge Garrett TI and TII style turbocharger from foreign particles that can harm the internal precision... View Details Compare Quick view Turbo Dodge Parts | sku: #GLHSFANASSEMBLY GLHS REPLACEMENT AUXILIARY FAN ASSEMBLY These are complete, genuine Mopar, factory style, direct fit replacement auxiliary/radiator fan assemblies for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. The fan... MSRP: Now: $279.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #GLHSFANMOTOR GLHS REPLACEMENT FAN MOTOR These are genuine Mopar, factory style, direct fit replacement auxulirary/radiator electric fan motors for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. You can choose to... MSRP: Now: $129.00 Add to Cart Compare Quick view sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MANUAL BOOST CONTROLLER/GRAINGER VALVE W/ REUSABLE MICRON FILTER AND INSTALLATION ACCESSORIESAll 2.2/2.5 Turbocharged Dodge & Chrysler Cars Here is your solution for a reliable, high quality, race and street proven manual boost controller (MBC) that... MSRP: Now: $59.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) TURBO DODGE 12 POINT GRADE 12.9 INTAKE BOLTSTurbo Dodge Cars w/8 Valve Engines, 1 & 2 Piece Intake Manifolds This is our Dodge and Chrysler 2.2 and 2.5 intake manifold 12 point grade 12.9 head intake manifold bolt upgrade. These are the highest... MSRP: Now: $24.00 Add to Cart Compare Quick view sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) TURBO DODGE GRADE 12.9 EARLY TI (LOG) 12 POINT INTAKE BOLTSTurbo Dodge Cars (84-87) w/8 Valve Turbo Engines This is our Dodge and Chrysler 2.2 and 2.5 early TI (log manifold) intake manifold bolt upgrade. These are the highest quality GRADE 12... MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly Brand new 84-87 TURBO fuel pump assembly with integrated fuel level sending unit and float arm fits 84-87 Omni and Charger (including all Shelby) turbocharged vehicles. Used to replace both the internal and external (eliminating the need for the external... MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE L-BODY NIPPONDENSO 90AMP ALTERNATOR, BRACKET & HARNESS UPDATEFor All L-body cars 84-87 Do your headlights dim when you get on full boost? Wipers run slow if you have on the heater? Do you have a sub in the hatch with a big amp and the car... View Details Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details Turbo Dodge Parts | sku: #T1PCVHOSE Early T1 Style (Log) PCV Hose #4105733 Compare
Quick view Details Turbo Dodge Parts | sku: #EASYADJUST Easy Adjust Alternator Bracket MSRP: Now: $49.00 Add to Cart Compare Quick view Details sku: #EXHAUSTSTUDSANDNUTS EXHAUST MANIFOLD HEX STUDS w/COPPER NUTS MSRP: Now: $24.00 Add to Cart Compare Quick view Details Turbo Dodge Parts | sku: #NANOOILLINE Garrett Nano Filtered Turbo Oil Supply Line Compare Quick view Details Turbo Dodge Parts | sku: #GLHSFANASSEMBLY GLHS REPLACEMENT AUXILIARY FAN ASSEMBLY MSRP: Now: $279.00 Add to Cart Compare Quick view Details Turbo Dodge Parts | sku: #GLHSFANMOTOR GLHS REPLACEMENT FAN MOTOR MSRP: Now: $129.00 Add to Cart Compare Quick view Details sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MSRP: Now: $59.00 Choose Options Compare Quick view Details Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) MSRP: Now: $24.00 Add to Cart Compare Quick view Details sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Details Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Details Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE Compare Quick view Turbo Dodge Parts | sku: #CARBBREATHER Early Carb PCV/Breather Assembly w/Hoses Early 2.2 Carb engine PCV breather assembly with oil baffle snorkel and hoses. Nice, good used 2.2 carb engine PCV breather box, with original internal splash guard/baffle snorkel that goes inside the valve cover, this piece is almost always... MSRP: Now: $39.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #T1PCVHOSE Early T1 Style (Log) PCV Hose #4105733 *** ONLY 1 AVAILABLE *** New Genuine Mopar Crankcase Vent Valve Hose for Dodge and Chrysler "T1" (log manifold) turbo charged engines. Mopar #4105733. Attaches to the rear of the valve cover on the PCV vent hose fitting and connects the PCV valve to the... View Details Compare Quick view Turbo Dodge Parts | sku: #EASYADJUST Easy Adjust Alternator Bracket Easy adjust alternator bracket, refinished, mount bolt and adjuster hardware included. Replace your huge under powered original CryCo alternator that was designed for a points ignition with the later 90amp alternator units by NipponDenso or Bosh and use... MSRP: Now: $49.00 Add to Cart Compare Quick view sku: #EXHAUSTSTUDSANDNUTS EXHAUST MANIFOLD HEX STUDS w/COPPER NUTS TURBO DODGE HEX ALLEN EXHAUST STUDS WITH COPPER FLANGE NUTS Turbo Dodge Cars w/8 Valve Engines This is our Dodge and Chrysler 2.2 and 2.5 copper coated exhaust manifold nut and polished hex allen head stud upgrade. These are the highest quality GRADE... MSRP: Now: $24.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #NANOOILLINE Garrett Nano Filtered Turbo Oil Supply Line GARRETT TI/TII TURBO OIL SUPPLY LINE W/ REUSABLE 80 MICRON FILTRATION SYSTEM8 Valve Turbo Dodge Cars: Replaces Factory #4323108 Protect your turbo Dodge Garrett TI and TII style turbocharger from foreign particles that can harm the internal precision... View Details Compare Quick view Turbo Dodge Parts | sku: #GLHSFANASSEMBLY GLHS REPLACEMENT AUXILIARY FAN ASSEMBLY These are complete, genuine Mopar, factory style, direct fit replacement auxiliary/radiator fan assemblies for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. The fan... MSRP: Now: $279.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #GLHSFANMOTOR GLHS REPLACEMENT FAN MOTOR These are genuine Mopar, factory style, direct fit replacement auxulirary/radiator electric fan motors for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. You can choose to... MSRP: Now: $129.00 Add to Cart Compare Quick view sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MANUAL BOOST CONTROLLER/GRAINGER VALVE W/ REUSABLE MICRON FILTER AND INSTALLATION ACCESSORIESAll 2.2/2.5 Turbocharged Dodge & Chrysler Cars Here is your solution for a reliable, high quality, race and street proven manual boost controller (MBC) that... MSRP: Now: $59.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) TURBO DODGE 12 POINT GRADE 12.9 INTAKE BOLTSTurbo Dodge Cars w/8 Valve Engines, 1 & 2 Piece Intake Manifolds This is our Dodge and Chrysler 2.2 and 2.5 intake manifold 12 point grade 12.9 head intake manifold bolt upgrade. These are the highest... MSRP: Now: $24.00 Add to Cart Compare Quick view sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) TURBO DODGE GRADE 12.9 EARLY TI (LOG) 12 POINT INTAKE BOLTSTurbo Dodge Cars (84-87) w/8 Valve Turbo Engines This is our Dodge and Chrysler 2.2 and 2.5 early TI (log manifold) intake manifold bolt upgrade. These are the highest quality GRADE 12... MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly Brand new 84-87 TURBO fuel pump assembly with integrated fuel level sending unit and float arm fits 84-87 Omni and Charger (including all Shelby) turbocharged vehicles. Used to replace both the internal and external (eliminating the need for the external... MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE L-BODY NIPPONDENSO 90AMP ALTERNATOR, BRACKET & HARNESS UPDATEFor All L-body cars 84-87 Do your headlights dim when you get on full boost? Wipers run slow if you have on the heater? Do you have a sub in the hatch with a big amp and the car... View Details Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details sku: #EXHAUSTSTUDSANDNUTS EXHAUST MANIFOLD HEX STUDS w/COPPER NUTS MSRP: Now: $24.00 Add to Cart Compare Quick view Details Turbo Dodge Parts | sku: #NANOOILLINE Garrett Nano Filtered Turbo Oil Supply Line Compare Quick view Details Turbo Dodge Parts | sku: #GLHSFANASSEMBLY GLHS REPLACEMENT AUXILIARY FAN ASSEMBLY MSRP: Now: $279.00 Add to Cart Compare Quick view Details Turbo Dodge Parts | sku: #GLHSFANMOTOR GLHS REPLACEMENT FAN MOTOR MSRP: Now: $129.00 Add to Cart Compare Quick view Details sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MSRP: Now: $59.00 Choose Options Compare Quick view Details Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) MSRP: Now: $24.00 Add to Cart Compare Quick view Details sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Details Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Details Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE Compare Quick view Turbo Dodge Parts | sku: #CARBBREATHER Early Carb PCV/Breather Assembly w/Hoses Early 2.2 Carb engine PCV breather assembly with oil baffle snorkel and hoses. Nice, good used 2.2 carb engine PCV breather box, with original internal splash guard/baffle snorkel that goes inside the valve cover, this piece is almost always... MSRP: Now: $39.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #T1PCVHOSE Early T1 Style (Log) PCV Hose #4105733 *** ONLY 1 AVAILABLE *** New Genuine Mopar Crankcase Vent Valve Hose for Dodge and Chrysler "T1" (log manifold) turbo charged engines. Mopar #4105733. Attaches to the rear of the valve cover on the PCV vent hose fitting and connects the PCV valve to the... View Details Compare Quick view Turbo Dodge Parts | sku: #EASYADJUST Easy Adjust Alternator Bracket Easy adjust alternator bracket, refinished, mount bolt and adjuster hardware included. Replace your huge under powered original CryCo alternator that was designed for a points ignition with the later 90amp alternator units by NipponDenso or Bosh and use... MSRP: Now: $49.00 Add to Cart Compare Quick view sku: #EXHAUSTSTUDSANDNUTS EXHAUST MANIFOLD HEX STUDS w/COPPER NUTS TURBO DODGE HEX ALLEN EXHAUST STUDS WITH COPPER FLANGE NUTS Turbo Dodge Cars w/8 Valve Engines This is our Dodge and Chrysler 2.2 and 2.5 copper coated exhaust manifold nut and polished hex allen head stud upgrade. These are the highest quality GRADE... MSRP: Now: $24.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #NANOOILLINE Garrett Nano Filtered Turbo Oil Supply Line GARRETT TI/TII TURBO OIL SUPPLY LINE W/ REUSABLE 80 MICRON FILTRATION SYSTEM8 Valve Turbo Dodge Cars: Replaces Factory #4323108 Protect your turbo Dodge Garrett TI and TII style turbocharger from foreign particles that can harm the internal precision... View Details Compare Quick view Turbo Dodge Parts | sku: #GLHSFANASSEMBLY GLHS REPLACEMENT AUXILIARY FAN ASSEMBLY These are complete, genuine Mopar, factory style, direct fit replacement auxiliary/radiator fan assemblies for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. The fan... MSRP: Now: $279.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #GLHSFANMOTOR GLHS REPLACEMENT FAN MOTOR These are genuine Mopar, factory style, direct fit replacement auxulirary/radiator electric fan motors for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. You can choose to... MSRP: Now: $129.00 Add to Cart Compare Quick view sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MANUAL BOOST CONTROLLER/GRAINGER VALVE W/ REUSABLE MICRON FILTER AND INSTALLATION ACCESSORIESAll 2.2/2.5 Turbocharged Dodge & Chrysler Cars Here is your solution for a reliable, high quality, race and street proven manual boost controller (MBC) that... MSRP: Now: $59.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) TURBO DODGE 12 POINT GRADE 12.9 INTAKE BOLTSTurbo Dodge Cars w/8 Valve Engines, 1 & 2 Piece Intake Manifolds This is our Dodge and Chrysler 2.2 and 2.5 intake manifold 12 point grade 12.9 head intake manifold bolt upgrade. These are the highest... MSRP: Now: $24.00 Add to Cart Compare Quick view sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) TURBO DODGE GRADE 12.9 EARLY TI (LOG) 12 POINT INTAKE BOLTSTurbo Dodge Cars (84-87) w/8 Valve Turbo Engines This is our Dodge and Chrysler 2.2 and 2.5 early TI (log manifold) intake manifold bolt upgrade. These are the highest quality GRADE 12... MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly Brand new 84-87 TURBO fuel pump assembly with integrated fuel level sending unit and float arm fits 84-87 Omni and Charger (including all Shelby) turbocharged vehicles. Used to replace both the internal and external (eliminating the need for the external... MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE L-BODY NIPPONDENSO 90AMP ALTERNATOR, BRACKET & HARNESS UPDATEFor All L-body cars 84-87 Do your headlights dim when you get on full boost? Wipers run slow if you have on the heater? Do you have a sub in the hatch with a big amp and the car... View Details Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details Turbo Dodge Parts | sku: #NANOOILLINE Garrett Nano Filtered Turbo Oil Supply Line Compare
Quick view Details Turbo Dodge Parts | sku: #GLHSFANASSEMBLY GLHS REPLACEMENT AUXILIARY FAN ASSEMBLY MSRP: Now: $279.00 Add to Cart Compare Quick view Details Turbo Dodge Parts | sku: #GLHSFANMOTOR GLHS REPLACEMENT FAN MOTOR MSRP: Now: $129.00 Add to Cart Compare Quick view Details sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MSRP: Now: $59.00 Choose Options Compare Quick view Details Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) MSRP: Now: $24.00 Add to Cart Compare Quick view Details sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Details Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Details Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE Compare Quick view Turbo Dodge Parts | sku: #CARBBREATHER Early Carb PCV/Breather Assembly w/Hoses Early 2.2 Carb engine PCV breather assembly with oil baffle snorkel and hoses. Nice, good used 2.2 carb engine PCV breather box, with original internal splash guard/baffle snorkel that goes inside the valve cover, this piece is almost always... MSRP: Now: $39.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #T1PCVHOSE Early T1 Style (Log) PCV Hose #4105733 *** ONLY 1 AVAILABLE *** New Genuine Mopar Crankcase Vent Valve Hose for Dodge and Chrysler "T1" (log manifold) turbo charged engines. Mopar #4105733. Attaches to the rear of the valve cover on the PCV vent hose fitting and connects the PCV valve to the... View Details Compare Quick view Turbo Dodge Parts | sku: #EASYADJUST Easy Adjust Alternator Bracket Easy adjust alternator bracket, refinished, mount bolt and adjuster hardware included. Replace your huge under powered original CryCo alternator that was designed for a points ignition with the later 90amp alternator units by NipponDenso or Bosh and use... MSRP: Now: $49.00 Add to Cart Compare Quick view sku: #EXHAUSTSTUDSANDNUTS EXHAUST MANIFOLD HEX STUDS w/COPPER NUTS TURBO DODGE HEX ALLEN EXHAUST STUDS WITH COPPER FLANGE NUTS Turbo Dodge Cars w/8 Valve Engines This is our Dodge and Chrysler 2.2 and 2.5 copper coated exhaust manifold nut and polished hex allen head stud upgrade. These are the highest quality GRADE... MSRP: Now: $24.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #NANOOILLINE Garrett Nano Filtered Turbo Oil Supply Line GARRETT TI/TII TURBO OIL SUPPLY LINE W/ REUSABLE 80 MICRON FILTRATION SYSTEM8 Valve Turbo Dodge Cars: Replaces Factory #4323108 Protect your turbo Dodge Garrett TI and TII style turbocharger from foreign particles that can harm the internal precision... View Details Compare Quick view Turbo Dodge Parts | sku: #GLHSFANASSEMBLY GLHS REPLACEMENT AUXILIARY FAN ASSEMBLY These are complete, genuine Mopar, factory style, direct fit replacement auxiliary/radiator fan assemblies for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. The fan... MSRP: Now: $279.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #GLHSFANMOTOR GLHS REPLACEMENT FAN MOTOR These are genuine Mopar, factory style, direct fit replacement auxulirary/radiator electric fan motors for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. You can choose to... MSRP: Now: $129.00 Add to Cart Compare Quick view sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MANUAL BOOST CONTROLLER/GRAINGER VALVE W/ REUSABLE MICRON FILTER AND INSTALLATION ACCESSORIESAll 2.2/2.5 Turbocharged Dodge & Chrysler Cars Here is your solution for a reliable, high quality, race and street proven manual boost controller (MBC) that... MSRP: Now: $59.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) TURBO DODGE 12 POINT GRADE 12.9 INTAKE BOLTSTurbo Dodge Cars w/8 Valve Engines, 1 & 2 Piece Intake Manifolds This is our Dodge and Chrysler 2.2 and 2.5 intake manifold 12 point grade 12.9 head intake manifold bolt upgrade. These are the highest... MSRP: Now: $24.00 Add to Cart Compare Quick view sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) TURBO DODGE GRADE 12.9 EARLY TI (LOG) 12 POINT INTAKE BOLTSTurbo Dodge Cars (84-87) w/8 Valve Turbo Engines This is our Dodge and Chrysler 2.2 and 2.5 early TI (log manifold) intake manifold bolt upgrade. These are the highest quality GRADE 12... MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly Brand new 84-87 TURBO fuel pump assembly with integrated fuel level sending unit and float arm fits 84-87 Omni and Charger (including all Shelby) turbocharged vehicles. Used to replace both the internal and external (eliminating the need for the external... MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE L-BODY NIPPONDENSO 90AMP ALTERNATOR, BRACKET & HARNESS UPDATEFor All L-body cars 84-87 Do your headlights dim when you get on full boost? Wipers run slow if you have on the heater? Do you have a sub in the hatch with a big amp and the car... View Details Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details Turbo Dodge Parts | sku: #GLHSFANMOTOR GLHS REPLACEMENT FAN MOTOR MSRP: Now: $129.00 Add to Cart Compare Quick view Details sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MSRP: Now: $59.00 Choose Options Compare Quick view Details Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) MSRP: Now: $24.00 Add to Cart Compare Quick view Details sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Details Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Details Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE Compare Quick view Turbo Dodge Parts | sku: #CARBBREATHER Early Carb PCV/Breather Assembly w/Hoses Early 2.2 Carb engine PCV breather assembly with oil baffle snorkel and hoses. Nice, good used 2.2 carb engine PCV breather box, with original internal splash guard/baffle snorkel that goes inside the valve cover, this piece is almost always... MSRP: Now: $39.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #T1PCVHOSE Early T1 Style (Log) PCV Hose #4105733 *** ONLY 1 AVAILABLE *** New Genuine Mopar Crankcase Vent Valve Hose for Dodge and Chrysler "T1" (log manifold) turbo charged engines. Mopar #4105733. Attaches to the rear of the valve cover on the PCV vent hose fitting and connects the PCV valve to the... View Details Compare Quick view Turbo Dodge Parts | sku: #EASYADJUST Easy Adjust Alternator Bracket Easy adjust alternator bracket, refinished, mount bolt and adjuster hardware included. Replace your huge under powered original CryCo alternator that was designed for a points ignition with the later 90amp alternator units by NipponDenso or Bosh and use... MSRP: Now: $49.00 Add to Cart Compare Quick view sku: #EXHAUSTSTUDSANDNUTS EXHAUST MANIFOLD HEX STUDS w/COPPER NUTS TURBO DODGE HEX ALLEN EXHAUST STUDS WITH COPPER FLANGE NUTS Turbo Dodge Cars w/8 Valve Engines This is our Dodge and Chrysler 2.2 and 2.5 copper coated exhaust manifold nut and polished hex allen head stud upgrade. These are the highest quality GRADE... MSRP: Now: $24.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #NANOOILLINE Garrett Nano Filtered Turbo Oil Supply Line GARRETT TI/TII TURBO OIL SUPPLY LINE W/ REUSABLE 80 MICRON FILTRATION SYSTEM8 Valve Turbo Dodge Cars: Replaces Factory #4323108 Protect your turbo Dodge Garrett TI and TII style turbocharger from foreign particles that can harm the internal precision... View Details Compare Quick view Turbo Dodge Parts | sku: #GLHSFANASSEMBLY GLHS REPLACEMENT AUXILIARY FAN ASSEMBLY These are complete, genuine Mopar, factory style, direct fit replacement auxiliary/radiator fan assemblies for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. The fan... MSRP: Now: $279.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #GLHSFANMOTOR GLHS REPLACEMENT FAN MOTOR These are genuine Mopar, factory style, direct fit replacement auxulirary/radiator electric fan motors for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. You can choose to... MSRP: Now: $129.00 Add to Cart Compare Quick view sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MANUAL BOOST CONTROLLER/GRAINGER VALVE W/ REUSABLE MICRON FILTER AND INSTALLATION ACCESSORIESAll 2.2/2.5 Turbocharged Dodge & Chrysler Cars Here is your solution for a reliable, high quality, race and street proven manual boost controller (MBC) that... MSRP: Now: $59.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) TURBO DODGE 12 POINT GRADE 12.9 INTAKE BOLTSTurbo Dodge Cars w/8 Valve Engines, 1 & 2 Piece Intake Manifolds This is our Dodge and Chrysler 2.2 and 2.5 intake manifold 12 point grade 12.9 head intake manifold bolt upgrade. These are the highest... MSRP: Now: $24.00 Add to Cart Compare Quick view sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) TURBO DODGE GRADE 12.9 EARLY TI (LOG) 12 POINT INTAKE BOLTSTurbo Dodge Cars (84-87) w/8 Valve Turbo Engines This is our Dodge and Chrysler 2.2 and 2.5 early TI (log manifold) intake manifold bolt upgrade. These are the highest quality GRADE 12... MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly Brand new 84-87 TURBO fuel pump assembly with integrated fuel level sending unit and float arm fits 84-87 Omni and Charger (including all Shelby) turbocharged vehicles. Used to replace both the internal and external (eliminating the need for the external... MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE L-BODY NIPPONDENSO 90AMP ALTERNATOR, BRACKET & HARNESS UPDATEFor All L-body cars 84-87 Do your headlights dim when you get on full boost? Wipers run slow if you have on the heater? Do you have a sub in the hatch with a big amp and the car... View Details Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MSRP: Now: $59.00 Choose Options Compare Quick view Details Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) MSRP: Now: $24.00 Add to Cart Compare Quick view Details sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Details Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Details Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE Compare Quick view Turbo Dodge Parts | sku: #CARBBREATHER Early Carb PCV/Breather Assembly w/Hoses Early 2.2 Carb engine PCV breather assembly with oil baffle snorkel and hoses. Nice, good used 2.2 carb engine PCV breather box, with original internal splash guard/baffle snorkel that goes inside the valve cover, this piece is almost always... MSRP: Now: $39.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #T1PCVHOSE Early T1 Style (Log) PCV Hose #4105733 *** ONLY 1 AVAILABLE *** New Genuine Mopar Crankcase Vent Valve Hose for Dodge and Chrysler "T1" (log manifold) turbo charged engines. Mopar #4105733. Attaches to the rear of the valve cover on the PCV vent hose fitting and connects the PCV valve to the... View Details Compare Quick view Turbo Dodge Parts | sku: #EASYADJUST Easy Adjust Alternator Bracket Easy adjust alternator bracket, refinished, mount bolt and adjuster hardware included. Replace your huge under powered original CryCo alternator that was designed for a points ignition with the later 90amp alternator units by NipponDenso or Bosh and use... MSRP: Now: $49.00 Add to Cart Compare Quick view sku: #EXHAUSTSTUDSANDNUTS EXHAUST MANIFOLD HEX STUDS w/COPPER NUTS TURBO DODGE HEX ALLEN EXHAUST STUDS WITH COPPER FLANGE NUTS Turbo Dodge Cars w/8 Valve Engines This is our Dodge and Chrysler 2.2 and 2.5 copper coated exhaust manifold nut and polished hex allen head stud upgrade. These are the highest quality GRADE... MSRP: Now: $24.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #NANOOILLINE Garrett Nano Filtered Turbo Oil Supply Line GARRETT TI/TII TURBO OIL SUPPLY LINE W/ REUSABLE 80 MICRON FILTRATION SYSTEM8 Valve Turbo Dodge Cars: Replaces Factory #4323108 Protect your turbo Dodge Garrett TI and TII style turbocharger from foreign particles that can harm the internal precision... View Details Compare Quick view Turbo Dodge Parts | sku: #GLHSFANASSEMBLY GLHS REPLACEMENT AUXILIARY FAN ASSEMBLY These are complete, genuine Mopar, factory style, direct fit replacement auxiliary/radiator fan assemblies for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. The fan... MSRP: Now: $279.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #GLHSFANMOTOR GLHS REPLACEMENT FAN MOTOR These are genuine Mopar, factory style, direct fit replacement auxulirary/radiator electric fan motors for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. You can choose to... MSRP: Now: $129.00 Add to Cart Compare Quick view sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MANUAL BOOST CONTROLLER/GRAINGER VALVE W/ REUSABLE MICRON FILTER AND INSTALLATION ACCESSORIESAll 2.2/2.5 Turbocharged Dodge & Chrysler Cars Here is your solution for a reliable, high quality, race and street proven manual boost controller (MBC) that... MSRP: Now: $59.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) TURBO DODGE 12 POINT GRADE 12.9 INTAKE BOLTSTurbo Dodge Cars w/8 Valve Engines, 1 & 2 Piece Intake Manifolds This is our Dodge and Chrysler 2.2 and 2.5 intake manifold 12 point grade 12.9 head intake manifold bolt upgrade. These are the highest... MSRP: Now: $24.00 Add to Cart Compare Quick view sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) TURBO DODGE GRADE 12.9 EARLY TI (LOG) 12 POINT INTAKE BOLTSTurbo Dodge Cars (84-87) w/8 Valve Turbo Engines This is our Dodge and Chrysler 2.2 and 2.5 early TI (log manifold) intake manifold bolt upgrade. These are the highest quality GRADE 12... MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly Brand new 84-87 TURBO fuel pump assembly with integrated fuel level sending unit and float arm fits 84-87 Omni and Charger (including all Shelby) turbocharged vehicles. Used to replace both the internal and external (eliminating the need for the external... MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE L-BODY NIPPONDENSO 90AMP ALTERNATOR, BRACKET & HARNESS UPDATEFor All L-body cars 84-87 Do your headlights dim when you get on full boost? Wipers run slow if you have on the heater? Do you have a sub in the hatch with a big amp and the car... View Details Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) MSRP: Now: $24.00 Add to Cart Compare Quick view Details sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Details Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Details Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE Compare Quick view Turbo Dodge Parts | sku: #CARBBREATHER Early Carb PCV/Breather Assembly w/Hoses Early 2.2 Carb engine PCV breather assembly with oil baffle snorkel and hoses. Nice, good used 2.2 carb engine PCV breather box, with original internal splash guard/baffle snorkel that goes inside the valve cover, this piece is almost always... MSRP: Now: $39.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #T1PCVHOSE Early T1 Style (Log) PCV Hose #4105733 *** ONLY 1 AVAILABLE *** New Genuine Mopar Crankcase Vent Valve Hose for Dodge and Chrysler "T1" (log manifold) turbo charged engines. Mopar #4105733. Attaches to the rear of the valve cover on the PCV vent hose fitting and connects the PCV valve to the... View Details Compare Quick view Turbo Dodge Parts | sku: #EASYADJUST Easy Adjust Alternator Bracket Easy adjust alternator bracket, refinished, mount bolt and adjuster hardware included. Replace your huge under powered original CryCo alternator that was designed for a points ignition with the later 90amp alternator units by NipponDenso or Bosh and use... MSRP: Now: $49.00 Add to Cart Compare Quick view sku: #EXHAUSTSTUDSANDNUTS EXHAUST MANIFOLD HEX STUDS w/COPPER NUTS TURBO DODGE HEX ALLEN EXHAUST STUDS WITH COPPER FLANGE NUTS Turbo Dodge Cars w/8 Valve Engines This is our Dodge and Chrysler 2.2 and 2.5 copper coated exhaust manifold nut and polished hex allen head stud upgrade. These are the highest quality GRADE... MSRP: Now: $24.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #NANOOILLINE Garrett Nano Filtered Turbo Oil Supply Line GARRETT TI/TII TURBO OIL SUPPLY LINE W/ REUSABLE 80 MICRON FILTRATION SYSTEM8 Valve Turbo Dodge Cars: Replaces Factory #4323108 Protect your turbo Dodge Garrett TI and TII style turbocharger from foreign particles that can harm the internal precision... View Details Compare Quick view Turbo Dodge Parts | sku: #GLHSFANASSEMBLY GLHS REPLACEMENT AUXILIARY FAN ASSEMBLY These are complete, genuine Mopar, factory style, direct fit replacement auxiliary/radiator fan assemblies for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. The fan... MSRP: Now: $279.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #GLHSFANMOTOR GLHS REPLACEMENT FAN MOTOR These are genuine Mopar, factory style, direct fit replacement auxulirary/radiator electric fan motors for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. You can choose to... MSRP: Now: $129.00 Add to Cart Compare Quick view sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MANUAL BOOST CONTROLLER/GRAINGER VALVE W/ REUSABLE MICRON FILTER AND INSTALLATION ACCESSORIESAll 2.2/2.5 Turbocharged Dodge & Chrysler Cars Here is your solution for a reliable, high quality, race and street proven manual boost controller (MBC) that... MSRP: Now: $59.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) TURBO DODGE 12 POINT GRADE 12.9 INTAKE BOLTSTurbo Dodge Cars w/8 Valve Engines, 1 & 2 Piece Intake Manifolds This is our Dodge and Chrysler 2.2 and 2.5 intake manifold 12 point grade 12.9 head intake manifold bolt upgrade. These are the highest... MSRP: Now: $24.00 Add to Cart Compare Quick view sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) TURBO DODGE GRADE 12.9 EARLY TI (LOG) 12 POINT INTAKE BOLTSTurbo Dodge Cars (84-87) w/8 Valve Turbo Engines This is our Dodge and Chrysler 2.2 and 2.5 early TI (log manifold) intake manifold bolt upgrade. These are the highest quality GRADE 12... MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly Brand new 84-87 TURBO fuel pump assembly with integrated fuel level sending unit and float arm fits 84-87 Omni and Charger (including all Shelby) turbocharged vehicles. Used to replace both the internal and external (eliminating the need for the external... MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE L-BODY NIPPONDENSO 90AMP ALTERNATOR, BRACKET & HARNESS UPDATEFor All L-body cars 84-87 Do your headlights dim when you get on full boost? Wipers run slow if you have on the heater? Do you have a sub in the hatch with a big amp and the car... View Details Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Details sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Details Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Details Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE Compare Quick view Turbo Dodge Parts | sku: #CARBBREATHER Early Carb PCV/Breather Assembly w/Hoses Early 2.2 Carb engine PCV breather assembly with oil baffle snorkel and hoses. Nice, good used 2.2 carb engine PCV breather box, with original internal splash guard/baffle snorkel that goes inside the valve cover, this piece is almost always... MSRP: Now: $39.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #T1PCVHOSE Early T1 Style (Log) PCV Hose #4105733 *** ONLY 1 AVAILABLE *** New Genuine Mopar Crankcase Vent Valve Hose for Dodge and Chrysler "T1" (log manifold) turbo charged engines. Mopar #4105733. Attaches to the rear of the valve cover on the PCV vent hose fitting and connects the PCV valve to the... View Details Compare Quick view Turbo Dodge Parts | sku: #EASYADJUST Easy Adjust Alternator Bracket Easy adjust alternator bracket, refinished, mount bolt and adjuster hardware included. Replace your huge under powered original CryCo alternator that was designed for a points ignition with the later 90amp alternator units by NipponDenso or Bosh and use... MSRP: Now: $49.00 Add to Cart Compare Quick view sku: #EXHAUSTSTUDSANDNUTS EXHAUST MANIFOLD HEX STUDS w/COPPER NUTS TURBO DODGE HEX ALLEN EXHAUST STUDS WITH COPPER FLANGE NUTS Turbo Dodge Cars w/8 Valve Engines This is our Dodge and Chrysler 2.2 and 2.5 copper coated exhaust manifold nut and polished hex allen head stud upgrade. These are the highest quality GRADE... MSRP: Now: $24.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #NANOOILLINE Garrett Nano Filtered Turbo Oil Supply Line GARRETT TI/TII TURBO OIL SUPPLY LINE W/ REUSABLE 80 MICRON FILTRATION SYSTEM8 Valve Turbo Dodge Cars: Replaces Factory #4323108 Protect your turbo Dodge Garrett TI and TII style turbocharger from foreign particles that can harm the internal precision... View Details Compare Quick view Turbo Dodge Parts | sku: #GLHSFANASSEMBLY GLHS REPLACEMENT AUXILIARY FAN ASSEMBLY These are complete, genuine Mopar, factory style, direct fit replacement auxiliary/radiator fan assemblies for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. The fan... MSRP: Now: $279.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #GLHSFANMOTOR GLHS REPLACEMENT FAN MOTOR These are genuine Mopar, factory style, direct fit replacement auxulirary/radiator electric fan motors for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. You can choose to... MSRP: Now: $129.00 Add to Cart Compare Quick view sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MANUAL BOOST CONTROLLER/GRAINGER VALVE W/ REUSABLE MICRON FILTER AND INSTALLATION ACCESSORIESAll 2.2/2.5 Turbocharged Dodge & Chrysler Cars Here is your solution for a reliable, high quality, race and street proven manual boost controller (MBC) that... MSRP: Now: $59.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) TURBO DODGE 12 POINT GRADE 12.9 INTAKE BOLTSTurbo Dodge Cars w/8 Valve Engines, 1 & 2 Piece Intake Manifolds This is our Dodge and Chrysler 2.2 and 2.5 intake manifold 12 point grade 12.9 head intake manifold bolt upgrade. These are the highest... MSRP: Now: $24.00 Add to Cart Compare Quick view sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) TURBO DODGE GRADE 12.9 EARLY TI (LOG) 12 POINT INTAKE BOLTSTurbo Dodge Cars (84-87) w/8 Valve Turbo Engines This is our Dodge and Chrysler 2.2 and 2.5 early TI (log manifold) intake manifold bolt upgrade. These are the highest quality GRADE 12... MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly Brand new 84-87 TURBO fuel pump assembly with integrated fuel level sending unit and float arm fits 84-87 Omni and Charger (including all Shelby) turbocharged vehicles. Used to replace both the internal and external (eliminating the need for the external... MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE L-BODY NIPPONDENSO 90AMP ALTERNATOR, BRACKET & HARNESS UPDATEFor All L-body cars 84-87 Do your headlights dim when you get on full boost? Wipers run slow if you have on the heater? Do you have a sub in the hatch with a big amp and the car... View Details Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
SALE Quick view Details Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare
Quick view Turbo Dodge Parts | sku: #CARBBREATHER Early Carb PCV/Breather Assembly w/Hoses Early 2.2 Carb engine PCV breather assembly with oil baffle snorkel and hoses. Nice, good used 2.2 carb engine PCV breather box, with original internal splash guard/baffle snorkel that goes inside the valve cover, this piece is almost always... MSRP: Now: $39.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #T1PCVHOSE Early T1 Style (Log) PCV Hose #4105733 *** ONLY 1 AVAILABLE *** New Genuine Mopar Crankcase Vent Valve Hose for Dodge and Chrysler "T1" (log manifold) turbo charged engines. Mopar #4105733. Attaches to the rear of the valve cover on the PCV vent hose fitting and connects the PCV valve to the... View Details Compare Quick view Turbo Dodge Parts | sku: #EASYADJUST Easy Adjust Alternator Bracket Easy adjust alternator bracket, refinished, mount bolt and adjuster hardware included. Replace your huge under powered original CryCo alternator that was designed for a points ignition with the later 90amp alternator units by NipponDenso or Bosh and use... MSRP: Now: $49.00 Add to Cart Compare Quick view sku: #EXHAUSTSTUDSANDNUTS EXHAUST MANIFOLD HEX STUDS w/COPPER NUTS TURBO DODGE HEX ALLEN EXHAUST STUDS WITH COPPER FLANGE NUTS Turbo Dodge Cars w/8 Valve Engines This is our Dodge and Chrysler 2.2 and 2.5 copper coated exhaust manifold nut and polished hex allen head stud upgrade. These are the highest quality GRADE... MSRP: Now: $24.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #NANOOILLINE Garrett Nano Filtered Turbo Oil Supply Line GARRETT TI/TII TURBO OIL SUPPLY LINE W/ REUSABLE 80 MICRON FILTRATION SYSTEM8 Valve Turbo Dodge Cars: Replaces Factory #4323108 Protect your turbo Dodge Garrett TI and TII style turbocharger from foreign particles that can harm the internal precision... View Details Compare Quick view Turbo Dodge Parts | sku: #GLHSFANASSEMBLY GLHS REPLACEMENT AUXILIARY FAN ASSEMBLY These are complete, genuine Mopar, factory style, direct fit replacement auxiliary/radiator fan assemblies for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. The fan... MSRP: Now: $279.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #GLHSFANMOTOR GLHS REPLACEMENT FAN MOTOR These are genuine Mopar, factory style, direct fit replacement auxulirary/radiator electric fan motors for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. You can choose to... MSRP: Now: $129.00 Add to Cart Compare Quick view sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MANUAL BOOST CONTROLLER/GRAINGER VALVE W/ REUSABLE MICRON FILTER AND INSTALLATION ACCESSORIESAll 2.2/2.5 Turbocharged Dodge & Chrysler Cars Here is your solution for a reliable, high quality, race and street proven manual boost controller (MBC) that... MSRP: Now: $59.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) TURBO DODGE 12 POINT GRADE 12.9 INTAKE BOLTSTurbo Dodge Cars w/8 Valve Engines, 1 & 2 Piece Intake Manifolds This is our Dodge and Chrysler 2.2 and 2.5 intake manifold 12 point grade 12.9 head intake manifold bolt upgrade. These are the highest... MSRP: Now: $24.00 Add to Cart Compare Quick view sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) TURBO DODGE GRADE 12.9 EARLY TI (LOG) 12 POINT INTAKE BOLTSTurbo Dodge Cars (84-87) w/8 Valve Turbo Engines This is our Dodge and Chrysler 2.2 and 2.5 early TI (log manifold) intake manifold bolt upgrade. These are the highest quality GRADE 12... MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly Brand new 84-87 TURBO fuel pump assembly with integrated fuel level sending unit and float arm fits 84-87 Omni and Charger (including all Shelby) turbocharged vehicles. Used to replace both the internal and external (eliminating the need for the external... MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE L-BODY NIPPONDENSO 90AMP ALTERNATOR, BRACKET & HARNESS UPDATEFor All L-body cars 84-87 Do your headlights dim when you get on full boost? Wipers run slow if you have on the heater? Do you have a sub in the hatch with a big amp and the car... View Details Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Turbo Dodge Parts | sku: #T1PCVHOSE Early T1 Style (Log) PCV Hose #4105733 *** ONLY 1 AVAILABLE *** New Genuine Mopar Crankcase Vent Valve Hose for Dodge and Chrysler "T1" (log manifold) turbo charged engines. Mopar #4105733. Attaches to the rear of the valve cover on the PCV vent hose fitting and connects the PCV valve to the... View Details Compare
Quick view Turbo Dodge Parts | sku: #EASYADJUST Easy Adjust Alternator Bracket Easy adjust alternator bracket, refinished, mount bolt and adjuster hardware included. Replace your huge under powered original CryCo alternator that was designed for a points ignition with the later 90amp alternator units by NipponDenso or Bosh and use... MSRP: Now: $49.00 Add to Cart Compare Quick view sku: #EXHAUSTSTUDSANDNUTS EXHAUST MANIFOLD HEX STUDS w/COPPER NUTS TURBO DODGE HEX ALLEN EXHAUST STUDS WITH COPPER FLANGE NUTS Turbo Dodge Cars w/8 Valve Engines This is our Dodge and Chrysler 2.2 and 2.5 copper coated exhaust manifold nut and polished hex allen head stud upgrade. These are the highest quality GRADE... MSRP: Now: $24.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #NANOOILLINE Garrett Nano Filtered Turbo Oil Supply Line GARRETT TI/TII TURBO OIL SUPPLY LINE W/ REUSABLE 80 MICRON FILTRATION SYSTEM8 Valve Turbo Dodge Cars: Replaces Factory #4323108 Protect your turbo Dodge Garrett TI and TII style turbocharger from foreign particles that can harm the internal precision... View Details Compare Quick view Turbo Dodge Parts | sku: #GLHSFANASSEMBLY GLHS REPLACEMENT AUXILIARY FAN ASSEMBLY These are complete, genuine Mopar, factory style, direct fit replacement auxiliary/radiator fan assemblies for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. The fan... MSRP: Now: $279.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #GLHSFANMOTOR GLHS REPLACEMENT FAN MOTOR These are genuine Mopar, factory style, direct fit replacement auxulirary/radiator electric fan motors for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. You can choose to... MSRP: Now: $129.00 Add to Cart Compare Quick view sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MANUAL BOOST CONTROLLER/GRAINGER VALVE W/ REUSABLE MICRON FILTER AND INSTALLATION ACCESSORIESAll 2.2/2.5 Turbocharged Dodge & Chrysler Cars Here is your solution for a reliable, high quality, race and street proven manual boost controller (MBC) that... MSRP: Now: $59.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) TURBO DODGE 12 POINT GRADE 12.9 INTAKE BOLTSTurbo Dodge Cars w/8 Valve Engines, 1 & 2 Piece Intake Manifolds This is our Dodge and Chrysler 2.2 and 2.5 intake manifold 12 point grade 12.9 head intake manifold bolt upgrade. These are the highest... MSRP: Now: $24.00 Add to Cart Compare Quick view sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) TURBO DODGE GRADE 12.9 EARLY TI (LOG) 12 POINT INTAKE BOLTSTurbo Dodge Cars (84-87) w/8 Valve Turbo Engines This is our Dodge and Chrysler 2.2 and 2.5 early TI (log manifold) intake manifold bolt upgrade. These are the highest quality GRADE 12... MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly Brand new 84-87 TURBO fuel pump assembly with integrated fuel level sending unit and float arm fits 84-87 Omni and Charger (including all Shelby) turbocharged vehicles. Used to replace both the internal and external (eliminating the need for the external... MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE L-BODY NIPPONDENSO 90AMP ALTERNATOR, BRACKET & HARNESS UPDATEFor All L-body cars 84-87 Do your headlights dim when you get on full boost? Wipers run slow if you have on the heater? Do you have a sub in the hatch with a big amp and the car... View Details Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view sku: #EXHAUSTSTUDSANDNUTS EXHAUST MANIFOLD HEX STUDS w/COPPER NUTS TURBO DODGE HEX ALLEN EXHAUST STUDS WITH COPPER FLANGE NUTS Turbo Dodge Cars w/8 Valve Engines This is our Dodge and Chrysler 2.2 and 2.5 copper coated exhaust manifold nut and polished hex allen head stud upgrade. These are the highest quality GRADE... MSRP: Now: $24.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #NANOOILLINE Garrett Nano Filtered Turbo Oil Supply Line GARRETT TI/TII TURBO OIL SUPPLY LINE W/ REUSABLE 80 MICRON FILTRATION SYSTEM8 Valve Turbo Dodge Cars: Replaces Factory #4323108 Protect your turbo Dodge Garrett TI and TII style turbocharger from foreign particles that can harm the internal precision... View Details Compare Quick view Turbo Dodge Parts | sku: #GLHSFANASSEMBLY GLHS REPLACEMENT AUXILIARY FAN ASSEMBLY These are complete, genuine Mopar, factory style, direct fit replacement auxiliary/radiator fan assemblies for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. The fan... MSRP: Now: $279.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #GLHSFANMOTOR GLHS REPLACEMENT FAN MOTOR These are genuine Mopar, factory style, direct fit replacement auxulirary/radiator electric fan motors for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. You can choose to... MSRP: Now: $129.00 Add to Cart Compare Quick view sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MANUAL BOOST CONTROLLER/GRAINGER VALVE W/ REUSABLE MICRON FILTER AND INSTALLATION ACCESSORIESAll 2.2/2.5 Turbocharged Dodge & Chrysler Cars Here is your solution for a reliable, high quality, race and street proven manual boost controller (MBC) that... MSRP: Now: $59.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) TURBO DODGE 12 POINT GRADE 12.9 INTAKE BOLTSTurbo Dodge Cars w/8 Valve Engines, 1 & 2 Piece Intake Manifolds This is our Dodge and Chrysler 2.2 and 2.5 intake manifold 12 point grade 12.9 head intake manifold bolt upgrade. These are the highest... MSRP: Now: $24.00 Add to Cart Compare Quick view sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) TURBO DODGE GRADE 12.9 EARLY TI (LOG) 12 POINT INTAKE BOLTSTurbo Dodge Cars (84-87) w/8 Valve Turbo Engines This is our Dodge and Chrysler 2.2 and 2.5 early TI (log manifold) intake manifold bolt upgrade. These are the highest quality GRADE 12... MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly Brand new 84-87 TURBO fuel pump assembly with integrated fuel level sending unit and float arm fits 84-87 Omni and Charger (including all Shelby) turbocharged vehicles. Used to replace both the internal and external (eliminating the need for the external... MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE L-BODY NIPPONDENSO 90AMP ALTERNATOR, BRACKET & HARNESS UPDATEFor All L-body cars 84-87 Do your headlights dim when you get on full boost? Wipers run slow if you have on the heater? Do you have a sub in the hatch with a big amp and the car... View Details Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Turbo Dodge Parts | sku: #NANOOILLINE Garrett Nano Filtered Turbo Oil Supply Line GARRETT TI/TII TURBO OIL SUPPLY LINE W/ REUSABLE 80 MICRON FILTRATION SYSTEM8 Valve Turbo Dodge Cars: Replaces Factory #4323108 Protect your turbo Dodge Garrett TI and TII style turbocharger from foreign particles that can harm the internal precision... View Details Compare
Quick view Turbo Dodge Parts | sku: #GLHSFANASSEMBLY GLHS REPLACEMENT AUXILIARY FAN ASSEMBLY These are complete, genuine Mopar, factory style, direct fit replacement auxiliary/radiator fan assemblies for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. The fan... MSRP: Now: $279.00 Add to Cart Compare Quick view Turbo Dodge Parts | sku: #GLHSFANMOTOR GLHS REPLACEMENT FAN MOTOR These are genuine Mopar, factory style, direct fit replacement auxulirary/radiator electric fan motors for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. You can choose to... MSRP: Now: $129.00 Add to Cart Compare Quick view sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MANUAL BOOST CONTROLLER/GRAINGER VALVE W/ REUSABLE MICRON FILTER AND INSTALLATION ACCESSORIESAll 2.2/2.5 Turbocharged Dodge & Chrysler Cars Here is your solution for a reliable, high quality, race and street proven manual boost controller (MBC) that... MSRP: Now: $59.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) TURBO DODGE 12 POINT GRADE 12.9 INTAKE BOLTSTurbo Dodge Cars w/8 Valve Engines, 1 & 2 Piece Intake Manifolds This is our Dodge and Chrysler 2.2 and 2.5 intake manifold 12 point grade 12.9 head intake manifold bolt upgrade. These are the highest... MSRP: Now: $24.00 Add to Cart Compare Quick view sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) TURBO DODGE GRADE 12.9 EARLY TI (LOG) 12 POINT INTAKE BOLTSTurbo Dodge Cars (84-87) w/8 Valve Turbo Engines This is our Dodge and Chrysler 2.2 and 2.5 early TI (log manifold) intake manifold bolt upgrade. These are the highest quality GRADE 12... MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly Brand new 84-87 TURBO fuel pump assembly with integrated fuel level sending unit and float arm fits 84-87 Omni and Charger (including all Shelby) turbocharged vehicles. Used to replace both the internal and external (eliminating the need for the external... MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE L-BODY NIPPONDENSO 90AMP ALTERNATOR, BRACKET & HARNESS UPDATEFor All L-body cars 84-87 Do your headlights dim when you get on full boost? Wipers run slow if you have on the heater? Do you have a sub in the hatch with a big amp and the car... View Details Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Turbo Dodge Parts | sku: #GLHSFANMOTOR GLHS REPLACEMENT FAN MOTOR These are genuine Mopar, factory style, direct fit replacement auxulirary/radiator electric fan motors for the 1986 and 1987 Shelby GLHS cars. This includes both the GLHS Omni from 1986 and the GLHS Shelby Charger from 1987. You can choose to... MSRP: Now: $129.00 Add to Cart Compare Quick view sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MANUAL BOOST CONTROLLER/GRAINGER VALVE W/ REUSABLE MICRON FILTER AND INSTALLATION ACCESSORIESAll 2.2/2.5 Turbocharged Dodge & Chrysler Cars Here is your solution for a reliable, high quality, race and street proven manual boost controller (MBC) that... MSRP: Now: $59.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) TURBO DODGE 12 POINT GRADE 12.9 INTAKE BOLTSTurbo Dodge Cars w/8 Valve Engines, 1 & 2 Piece Intake Manifolds This is our Dodge and Chrysler 2.2 and 2.5 intake manifold 12 point grade 12.9 head intake manifold bolt upgrade. These are the highest... MSRP: Now: $24.00 Add to Cart Compare Quick view sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) TURBO DODGE GRADE 12.9 EARLY TI (LOG) 12 POINT INTAKE BOLTSTurbo Dodge Cars (84-87) w/8 Valve Turbo Engines This is our Dodge and Chrysler 2.2 and 2.5 early TI (log manifold) intake manifold bolt upgrade. These are the highest quality GRADE 12... MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly Brand new 84-87 TURBO fuel pump assembly with integrated fuel level sending unit and float arm fits 84-87 Omni and Charger (including all Shelby) turbocharged vehicles. Used to replace both the internal and external (eliminating the need for the external... MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE L-BODY NIPPONDENSO 90AMP ALTERNATOR, BRACKET & HARNESS UPDATEFor All L-body cars 84-87 Do your headlights dim when you get on full boost? Wipers run slow if you have on the heater? Do you have a sub in the hatch with a big amp and the car... View Details Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view sku: #GRAINGERMBC GRAINGER VALVE - MANUAL BOOST CONTROLLER MANUAL BOOST CONTROLLER/GRAINGER VALVE W/ REUSABLE MICRON FILTER AND INSTALLATION ACCESSORIESAll 2.2/2.5 Turbocharged Dodge & Chrysler Cars Here is your solution for a reliable, high quality, race and street proven manual boost controller (MBC) that... MSRP: Now: $59.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) TURBO DODGE 12 POINT GRADE 12.9 INTAKE BOLTSTurbo Dodge Cars w/8 Valve Engines, 1 & 2 Piece Intake Manifolds This is our Dodge and Chrysler 2.2 and 2.5 intake manifold 12 point grade 12.9 head intake manifold bolt upgrade. These are the highest... MSRP: Now: $24.00 Add to Cart Compare Quick view sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) TURBO DODGE GRADE 12.9 EARLY TI (LOG) 12 POINT INTAKE BOLTSTurbo Dodge Cars (84-87) w/8 Valve Turbo Engines This is our Dodge and Chrysler 2.2 and 2.5 early TI (log manifold) intake manifold bolt upgrade. These are the highest quality GRADE 12... MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly Brand new 84-87 TURBO fuel pump assembly with integrated fuel level sending unit and float arm fits 84-87 Omni and Charger (including all Shelby) turbocharged vehicles. Used to replace both the internal and external (eliminating the need for the external... MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE L-BODY NIPPONDENSO 90AMP ALTERNATOR, BRACKET & HARNESS UPDATEFor All L-body cars 84-87 Do your headlights dim when you get on full boost? Wipers run slow if you have on the heater? Do you have a sub in the hatch with a big amp and the car... View Details Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Turbo Dodge Parts | sku: #T1T2INTAKEBOLTS INTAKE MANIFOLD BOLTS (LATER T1 & T2 MOTORS) TURBO DODGE 12 POINT GRADE 12.9 INTAKE BOLTSTurbo Dodge Cars w/8 Valve Engines, 1 & 2 Piece Intake Manifolds This is our Dodge and Chrysler 2.2 and 2.5 intake manifold 12 point grade 12.9 head intake manifold bolt upgrade. These are the highest... MSRP: Now: $24.00 Add to Cart Compare Quick view sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) TURBO DODGE GRADE 12.9 EARLY TI (LOG) 12 POINT INTAKE BOLTSTurbo Dodge Cars (84-87) w/8 Valve Turbo Engines This is our Dodge and Chrysler 2.2 and 2.5 early TI (log manifold) intake manifold bolt upgrade. These are the highest quality GRADE 12... MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly Brand new 84-87 TURBO fuel pump assembly with integrated fuel level sending unit and float arm fits 84-87 Omni and Charger (including all Shelby) turbocharged vehicles. Used to replace both the internal and external (eliminating the need for the external... MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE L-BODY NIPPONDENSO 90AMP ALTERNATOR, BRACKET & HARNESS UPDATEFor All L-body cars 84-87 Do your headlights dim when you get on full boost? Wipers run slow if you have on the heater? Do you have a sub in the hatch with a big amp and the car... View Details Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected
Quick view sku: #LOGINTAKEBOLTS INTAKE MANIFOLD BOLTS (LOG MOTORS ONLY) TURBO DODGE GRADE 12.9 EARLY TI (LOG) 12 POINT INTAKE BOLTSTurbo Dodge Cars (84-87) w/8 Valve Turbo Engines This is our Dodge and Chrysler 2.2 and 2.5 early TI (log manifold) intake manifold bolt upgrade. These are the highest quality GRADE 12... MSRP: Now: $24.00 Add to Cart Compare SALE Quick view Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly Brand new 84-87 TURBO fuel pump assembly with integrated fuel level sending unit and float arm fits 84-87 Omni and Charger (including all Shelby) turbocharged vehicles. Used to replace both the internal and external (eliminating the need for the external... MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare Quick view Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE L-BODY NIPPONDENSO 90AMP ALTERNATOR, BRACKET & HARNESS UPDATEFor All L-body cars 84-87 Do your headlights dim when you get on full boost? Wipers run slow if you have on the heater? Do you have a sub in the hatch with a big amp and the car... View Details Compare Previous 1 2 3 4 5 6 Next Previous 1 2 3 4 5 6 Next Compare Selected
SALE Quick view Turbo Dodge Parts | sku: #FUELPUMPASSEMBLY L-body TURBO Fuel pump and Sender Assembly Brand new 84-87 TURBO fuel pump assembly with integrated fuel level sending unit and float arm fits 84-87 Omni and Charger (including all Shelby) turbocharged vehicles. Used to replace both the internal and external (eliminating the need for the external... MSRP: $429.00 Was: $429.00 Now: $399.00 Choose Options Compare
Quick view Turbo Dodge Parts | sku: #NIPPONALTERNATOR NIPPONDENSO ALTERNATOR UPGRADE L-BODY NIPPONDENSO 90AMP ALTERNATOR, BRACKET & HARNESS UPDATEFor All L-body cars 84-87 Do your headlights dim when you get on full boost? Wipers run slow if you have on the heater? Do you have a sub in the hatch with a big amp and the car... View Details Compare