Product Description
If you are planning or in the process of converting your 84-87 T1 turbo Dodge (Daytona, Laser, Charger, Omni, Lebaron, 600, etc.) to T2 spec you are going to be hunting for the needed wiring harness and AIS/TPS connectors for your new T2 style throttle body. We offer a true-plug-n-play T1/T2 AIS/TPS conversion harness for this specific application.
This harness replaces and plugs directly into your existing main engine bay harness replacing the old T1 style harness. This harness includes the late T2 style IAC (Idle Air Control) valve connector and TPS connector as well as the two additional wires needing to be run to your logic module and the needed logic module connectors for them!
Installation takes minutes, you remove your existing early style IAC/TPS sensors from the throttle body along with the attached pigtail, then slip the wires from that pigtail connector out and replace them with the wires from your new conversion harness. No cutting, wiring, splicing needed.
Complete wiring diagram (online FAQ) is also included that describes the process. There are also many many online references on how this is done including a complete T1-T2 upgrade FAQ on several turbo Dodge enthusiast sites.
 |
 |
 |
 |
